TM 9-2350-256-34
INTERMEDIATE MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
PORTABLE FIRE EXTINGUISHER STOWAGE BOXES AND BRACKETS MAINTENANCE
REMOVAL, DISASSEMBLY, REPAIR, ASSEMBLY, INSTALLATION
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Materials/Parts
References
TM 9-2350-256-20
Removal
1.
Remove portable fire extinguisher stowage boxes and brackets in accordance with TM 9-2350-256-20.
NOTE
There are two portable fire extinguisher stowage boxes and brackets. This procedure covers one.
Disassembly
1.
Remove cotter pin (1), straight pin (2), rod end clevis (3), rivet (4), connecting link (5), nut (6), lockwasher (7), and retaining
strap (8) from mounting bracket (9). Discard cotter pin, rivet, and lockwasher.
2.
Remove rivet (10), fixed arm assembly (11), nut (12), rod connector (13), lockwasher (14), and nut (15) from mounting
bracket (9). Discard rivet and lockwasher.
Repair or Replacement
NOTE
There are two portable fire extinguisher stowage boxes and brackets. This procedure covers one.
0048 00-1