TM 9-2350-256-34
0051 00
13. Install pin (76).
NOTE
Cylinder of cable level winder assembly must be centered on piston when securing flange nuts (74).
14. Using wrench, secure flange nut (74) to support assembly (75) using three washers (73), lockwashers (72), and screws (71).
15. Repeat steps 13 and 14 for other side.
NOTE
Shim level winder assembly top guide (69) as required to prevent binding of cable level winder assembly
(71).
16. Install shim (70), level winder assembly top guide (69), five lockwashers (68), and screws (67).
17. Connect hydraulic lines (65) to fittings (66).
0051 00-22
