TM 9-2350-256-34
0053 00
Assembly
NOTE
Use hydraulic motor kit 11672161 on retrofitted vehicles when replacing a motor that is not a Dennison
model no. M4E-185-3N00-B101-M40712.
1.
Install gasket (72), pilot ring (hidden) (71), motor (70), four lockwashers (69), and screws (68).
2.
Install adapter union (67).
3.
Install two packings (hidden) (66).
4.
Install manifold (65), seven lockwashers (64), and screws (63).
5.
Install two packings (hidden) (62).
6.
Install counterbalance valve (60) and four screws (59). Torque screws to 55 lb-ft (74.6 Nm).
7.
Install hose assembly (58), elbow (57), and band marker (56).
8.
Install two packings (hidden) (55).
9.
Install combination control valve (25) and four screws (53). Torque screws to 45 lb-ft (61.0 Nm) (applicable only to
combination control valve manufactured by Hydreco).
10. Install four flanges (52), eight lockwashers (51), and screws (50).
0053 00-8
