TM 9-2350-256-34
INTERMEDIATE MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
HOIST WINCH COUNTERBALANCE VALVE REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Tool kit, general mechanic's (item 34, WP 0086 00)
Screws (8) (item 103, WP 0087 00)
Screw (item 219, WP 0087 00)
Materials/Parts
References
Lockwashers (8) (item 162, WP 0087 00)
Packings (2) (item 132, WP 0087 00)
Packings (4) (item 133, WP 0087 00)
Equipment Condition
Screws (3) (item 76, WP 0087 00)
Screws (4) (item 96, WP 0087 00)
Subfloor plates 4 and 11 removed (TM 9-2350-256-20)
NOTE
LOAD TEST REQUIREMENT--Load testing of hoist winch is mandatory, prior to use, following re-
placement of the hoist winch counterbalance valve.
Load testing will be accomplished by support maintenance activities.
Refer to the TESTING section in WP 0053 00 for the detailed step-by-step procedure.
0055 00-1
