TM 9-2350-256-34
INTERMEDIATE MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
MAIN WINCH BRAKE CYLINDER MAINTENANCE
REMOVAL, TESTING, INSTALLATION, ADJUSTMENT
INITIAL SETUP:
Test Equipment
Materials/Parts
Gage (item 9, WP 0086 00)
Screws (4) (item 101, WP 0087 00)
Tools and Special Tools
Equipment Condition
Tool kit, general mechanic's (item 34, WP 0086 00)
Subfloor plates 1 and 2 removed (TM 9-2350-256-20)
WARNING
Brake adjusting screw (2) must be loosened prior to removal of brake cylinder (5). Use care in removing
brake cylinder.
Removal
1.
Loosen locknut (1) and adjusting screw (2).
2.
Disconnect hose (3).
WARNING
Back off screws (4) evenly to prevent heavy spring pressure inside from "popping" cylinder.
3.
Remove four screws (4) and brake cylinder (5).
0056 00-1
