TM 9-2350-256-34
INTERMEDIATE MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
MAIN WINCH LEVEL WINDER ASSEMBLY MAINTENANCE
REMOVAL, DISASSEMBLY, CLEANING, INSPECTION, ASSEMBLY, INSTALLATION
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Materials/Parts
References
TM 9-2350-256-20
Removal
NOTE
Steps 1 thru 3 are for removing the arm without removing the entire main winch level winder assembly.
Refer to WP 0051 00 for removal of the entire main winch level winder assembly.
1.
Remove two screws (1) and screws (2).
2.
Remove main winch cable (3) in accordance with TM 9-2350-256-20.
3.
Remove self-locking nut (hidden) (4), washer (hidden) (5), shoulder bolt (6), and arm (7). Discard self-locking nut.
Disassembly
1.
The following illustration, with its accompanying legend, serves to identify all subassemblies and attaching parts. The
step-by-step disassembly procedure is provided after this illustration:
0060 00-1