TM 9-2350-256-34
0063 00
8.
Remove and discard four packings (74) from main winch control valve (73).
9.
Remove magnetic plug (75).
10. Drive out spring pin (76) and remove lever (77) from main winch control valve (73). Discard spring pin.
NOTE
Perform steps 11 thru 15 to remove power control valve.
11. Remove two screws (78), lockwashers (79), and power control valve (80). Discard lockwashers.
12. Remove adapter union (81) from power control valve (80).
13. Remove four cotter pins (82), washers (83), two pins (84), and lever (85) from bracket (86). Discard cotter pins.
14. Remove two screws (87), lockwashers (88), and bracket (86) from power control valve (80). Discard lockwashers.
15. Remove fitting (89) from power control valve (80).
0063 00-12
