TM 9-2350-256-34
0063 00
Inspection-Acceptance and Rejection Criteria
1.
Inspect all screws, plugs, nuts, and fittings for damaged threads, and hex or socket heads for rounded corners.
2.
Inspect all tapped holes for damaged threads. Repair damaged threads with a thread chaser.
3.
Inspect valve bodies for cracks.
Assembly
NOTE
The components that are assembled in step 1 will be installed to the subplate as "fittings (58)" during
INSTALLATION.
1.
Install nipple (131), tee (130), elbow (129), APU emergency winch control valve (18), and two couplings (128).
2.
Install magnetic plug (127), 16 hydraulic fittings (126), split flange (125), and bleeder valve (124).
3.
Connect metal bar (123) to bracket (56) with two washers (122), lockwashers (121), and screws (120).
4.
Install bracket (56), two washers (119), lockwashers (118), and screws (117).
0063 00-16