TM 9-2350-256-34
0066 00
4.
Install seal (18), split washer (17), dust cap (15), and yoke shaft assembly (16) to slip yoke assembly (19).
5.
Align arrows and tighten dust cap (15).
Installation
NOTE
Refer to WP 0022 00 for instructions on installing lockwire.
1.
Connect drive shaft (4) and install four lockwashers (14), screws (13), and lockwire (12). Dry torque screws to 8090 lb-ft
(108122 Nm).
2.
Connect cable (11) and tighten warning light switch (10).
3.
Connect two fuel lines (9).
4.
Connect five hydraulic lines (8).
0066 00-4
