TM 9-2350-256-34
0069 00
6.
Remove two screws (10), lockwashers (11), and retainer (12) holding piston eye pin (13) to crank arm (9) and cylinder (14).
Discard lockwashers.
CAUTION
Tie or block cylinder (14) to prevent damage from drop when piston eye pin (13) is pulled.
7.
Using adapter and puller, remove piston eye pin (13) from crank arm (9) and cylinder (14).
8.
Remove two screws (15), lockwashers (16), and retainer (17) holding cylinder eye pin (18) to other end of cylinder (14).
Discard lockwashers.
9.
Using adapter and puller, remove cylinder eye pin (18) from cylinder (14).
0069 00-3