TM 9--2350--292--10
0101 00--7
PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING
LUBRICATION INSTRUCTIONS -- CONTINUED
0101 00
TABLE 1 PREVENTIVE MAINTENANCE CHECKS AND SERVICES, BEFORE--CONTINUED
Item No.
Not Fully Mission
Capable If:
CREWMEMBER
Procedure
LOCATION
Item to Check/
Service
Interval
DRIVER
5 cont
Before
Engine Oil Level
Check --
Continued
c. Open ENGINE OIL LEVEL check and fill
access door.
d. Open ENGINE OIL LEVEL DOOR.
e. Remove oil gauge rod and wipe clean.
Insert oil gauge rod in gauge tube. Remove
oil gauge rod. Verify oil level on STATIC
ENG. side of oil gauge rod is between
FULL and 1--gallon range.
ENGINE OIL CHECK
ACCESS DOOR
ENGINE OIL LEVEL
ACCESS DOOR
OIL GAUGE ROD
ENGINE
OIL
LEVEL
1
2
3
4
ADD GALLONS
STATIC ENG.
FULL
WARNING
Engine oil can be ignited by hot engine
surfaces. To avoid engine fire, use offset
funnel (item 45, Table 2, WP 0128 00) and
utility jug (item 46, Table 2, WP 0128 00)
to add engine oil, clean oil from around oil
filler tube area with wiping rags (item 45,
WP 0130 00) after filling. Make sure en-
gine oil filler tube cap is tight and engine
oil fill access door is closed and latched.
