TABLE 1 PREVENTIVE MAINTENANCE CHECKS AND SERVICES, BEFORE (cont)

TABLE 1 PREVENTIVE MAINTENANCE CHECKS AND SERVICES, BEFORE (cont) - TM-9-2350-292-10_284

TABLE 1 PREVENTIVE MAINTENANCE CHECKS AND SERVICES, BEFORE (cont) - TM-9-2350-292-10_286

TM-9-2350-292-10 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
263

TM 9--2350--292--10 0101 00--11 PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING LUBRICATION INSTRUCTIONS -- CONTINUED 0101 00 TABLE 1 PREVENTIVE MAINTENANCE CHECKS AND SERVICES, BEFORE--CONTINUED Item No. Not Fully Mission Capable If: CREWMEMBER Procedure LOCATION Item to Check/ Service Interval 8 Before Hoist Winch Oil Level COMMANDER Park vehicle on a level surface. Open subfloor access door (WP 0036 00). Verify oil level is between the middle and top of the sight gauge. NOTE Do not fill above top of sight gauge, as correct oil level cannot be determined. If oil is below the middle of the sight gauge, remove the vent/fill plug and add proper grade oil (Table 6, WP 0101 00) until the oil level is between the middle and top of the sight gauge. Install vent/fill plug when oil is at correct level. Class III oil leaks. VENT/FILL PLUG SIGHT GAUGE HOIST WINCH DRAIN PLUG IS LOCATED IN WINCH DRUM SUBFLOOR ACCESS DOOR

Privacy Statement
Press Release
Contact