TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES, AFTER (cont)

TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES, AFTER (cont) - TM-9-2350-292-10_315

TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES, AFTER (cont) - TM-9-2350-292-10_317

TM-9-2350-292-10 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
294

TM 9--2350--292--10 0101 00--42 PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING LUBRICATION INSTRUCTIONS -- CONTINUED 0101 00 TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES, AFTER--CONTINUED Item No. Not Fully Mission Capable If: CREWMEMBER Procedure LOCATION Item toCheck/ Service Interval DRIVER 22 After Roadwheels and Hubs Compensating Idler Wheels And Hubs Right and Left Side a. Check for bent, broken or missing roadwheel, or compensating idler wheel. b. Check for any loose or missing mounting bolts or nuts. c. Check roadwheels and compensating idler wheels for chunking or separation. d. Inspect inner and outer roadwheel and compensating idler wheel hubs for leaks. NOTE Splattered grease indicates defective seal. a. Two roadwheels or idler wheels on same arm, either side, cracked, bent, or missing. b. Two or more mounting nuts missing on same wheel hub. c. Separation of 1 in. of rubber contact from metal surface around 75% of roadwheel or compensating idler wheels and/or chunking that exposes metal extending 3 to 4 in. on wheel surface exists. COMPENSATING IDLER WHEEL ROAD WHEEL FORWARD NOTE: SKIRTS REMOVED FOR CLARITY

Privacy Statement
Press Release
Contact