TM 9--2350--292--20--1
0188 00--10
POWERPACK ASSEMBLY REPLACEMENT -- CONTINUED
0188 00
Installation--Continued
CAUTION
When installing powerpack, be sure that half ring in right
output drive saddle fits in outermost groove of transmis-
sion output housing.
4. Position powerpack (51) in hull using hoisting beam (50) and suitable lifting device. Be sure that transmission
guide rollers (55) are inserted in hull guide rails (56).
5. Remove final drive sleeve tool from final drive shaft.
6. Turn engine mount release rod (49) clockwise as far as possible to secure engine to hull, remove hoisting beam
(50).
7. Pry drive output couplings (23) out of reduction drives (24) and into transmission output housings (52) as far as
possible.
Figure 166
23
49
51
50
55
56
24
52
