TM 9--2350--292--20--1
0188 00--16
POWERPACK ASSEMBLY REPLACEMENT -- CONTINUED
0188 00
Installation--Continued
NOTE
If necessary to turn propeller shaft to align screw holes,
connect battery power and turn vehicle MASTER switch
to ON position. Hold FUEL SHUTOFF switch in OFF
position and touch STARTER switch. When holes are in
position for installation, turn vehicle MASTER switch to
OFF position and disconnect battery power.
28. Slide propeller shaft (5) into position on power takeoff coupling (4), secure with four flat washers (3) and four
screws (2). Using torque wrench adapter (item 127, WP 0717 00) and torque wrench, torque screws (2) to
97--116 lb--ft (132--157 N•m). Secure screws (2) with new nonelectrical wire (1) using double--twist method.
Figure 292
1
2
3
4
5
01i102m
NOTE
FOLLOW--ON MAINTENANCE:
Connect STE/ICE pulse tachometer
(WP 0695 00)
Install engine deck assembly (WP 0417 00)
Install APU cover assembly (WP 0413 00)
Connect battery power (WP 0256 00)
END OF TASK
