TM 9--2350--292--20--1
0196 00--1
ENGINE OIL FILTERS REPLACEMENT
0196 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Jackscrews (2) (item 80, WP 0717 00)
Suitable container (1.0 gal. min. (3.8 L))
Torque wrench (item 21, WP 0717 00)
Materials/Parts
Self--lockign nuts (10) (item 251, WP 0718 00)
Cleaning cloth (item 59, WP 0716 00)
Lubricant (item 94, WP 0716 00)
Engine oil filter kit (item 253, WP 0718 00)
Equipment Conditions
Engine deck grilles removed (TM 9--2350--292--10)
References
TM 9--2350--292--10
Removal
1. Remove oil vent screw (1), flat washer (2) and preformed packing (3). Discard preformed packing.
NOTE
Do not loosen oil drain valve adapter.
2. Loosen oil drain valve plug (4) six complete turns and allow oil to drain into engine crankcase.
3. Remove 10 self--locking nuts (5), 10 flat washers (6) and retaining clip mounting bracket (7). Discard self--locking
nuts.
4. Install two 3/8--24 UNF x 1--1/2 jackscrews (8) in oil filter cover (9).
Figure 5
4
6
5
7
8
9
8
1
2
3
