TM 9--2350--292--20--1ENGINE OIL LEVEL GAUGE ROD AND FILLER TUBE REPLACEMENT --CONTINUED0198 00Installation--Continued5. Install plate (10) on engine with two new self--locking nuts (9).6. Install plate (8) on engine with two screws (7).7. Install oil filler assembly (6) and hose (2) on engine.8. Secure oil filler assembly (6) and oil filler cap with retaining chain (5) to plates (8 and 10) with two screws (4) andtwo new self--locking nuts (3).9. Install two hose clamps (1) on hose (2).Figure 754310978634121NOTEFOLLOW--ON MAINTENANCE:Install engine oil cooler support assembly (WP 0233 00)Install engine oil cooler, if removed (WP 0231 00)END OF TASK0198 00--5/6 blank
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business