TM 9--2350--292--20--1
0199 00--1
CYLINDER HEAD OIL DRAIN TUBES REPLACEMENT
0199 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Torque wrench (item 113, WP 0717 00)
Materials/Parts
Gaskets (4) (item 258, WP 0718 00)
Lockwashers (8) (item 10, WP 0718 00)
Marker tags (item 49, WP 0716 00)
Equipment Conditions
Engine oil drained (WP 0187 00)
Engine and transmission oil coolers removed (WP
0231 00)
Generator removed (WP 0237 00)
Starter removed (WP 0240 00)
Primary fuel filter removed (WP 0222 00)
Fuel/water separator removed (WP 0219 00)
Engine oil cooler frames removed (WP 0233 00)
NOTE
Perform only those steps necessary to replace the defec-
tive parts. Use legend reference guide.
Tag all hoses, tubes and tube assemblies prior to removal
to aid in installation.
Note hose and tube routing to aid in installation.
Removal
1. Remove clamps and attaching hardware securing hoses, tubes and tube assemblies to powerpack as shown in
legend and illustration. Discard gaskets.
2. Remove hoses, tubes, tube assemblies and fittings in accordance with the following legend and illustration.
3. Inspect parts for damage and replace as required.
Installation
1. Install hoses, tubes, tube assemblies and fittings in accordance with the following legend and illustration.
2. Secure hoses, tubes and tube assemblies to powerpack with clamps, attaching hardware and new gaskets as
shown in legend and illustration
3. Torque fluid passage bolts (7) to 275--300 lb--in (32--34 NSm).
NOTE
FOLLOW--ON MAINTENANCE:
Install fuel water separator (WP 0219 00)
Install primary fuel filter (WP 0222 00)
Install starter (WP 0240 00)
Install generator (WP 0237 00)
Install engine oil cooler frames (WP 0233 00)
Install engine and transmission oil coolers
(WP 0231 00)
Fill engine with oil (WP 0187 00)
