TM 9--2350--292--20--1
0200 00--1
ENGINE OIL HOSE ASSEMBLIES, TUBE ASSEMBLIES AND RELATED
PARTS REPLACEMENT
0200 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Preformed packings (2) (item 43, WP 0718 00)
Preformed packings (2) (item 311, WP 0718 00)
Gaskets (2) (item 281, WP 0718 00)
Lockwashers (2) (item 10, WP 0718 00)
Pressure sensitive tape (item 41, WP 0716 00)
Assembled--washer screws (4) (item 420,
WP 0718 00)
Self--locking nut (item 248, WP 0718 00)
Marker tags (item 49, WP 0716 00)
Wiping rags (item 7, WP 0716 00)
Tiedown strap (item 382, WP 0718 00)
Self--locking nuts (2) (item 385, WP 0718 00)
Equipment Conditions
Powerpack removed (WP 0188 00)
Engine oil drained (WP 0187 00)
Engine and transmission oil cooler access covers
removed (WP 0233 00)
Engine cooling fans and housings removed
(WP 0235 00)
NOTE
Perform only those steps necessary to replace the defec-
tive parts. Use legend reference guide.
Tag all parts prior to removal to aid in installation.
Place rags under hose connections to catch any oil that
spills during maintenance. Dispose of rags in accordance
with standard operating procedure.
Note hose and tube routing to aid in installation.
Removal
1 Remove clamps and attaching hardware securing hose assemblies, tube assemblies and fittings as shown in leg-
end and illustration. Discard lockwashers, self--locking nut and assembled--washer screws.
2 Remove hose assemblies, tube assemblies and fittings in accordance with the following legend and illustration.
Discard preformed packings and gaskets.
3. Inspect parts for damage and replace as required.
