TM 9--2350--292--20--1 0205 00--1 FUEL INJECTOR NOZZLE RETURN HOSES AND RELATED PARTS REPLACEMENT 0205 00 THIS WORK PACKAGE COVERS: Removal, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Torque wrench (item 21, WP 0717 00) Materials/Parts Lockwasher (item 58, WP 0718 00) Self--locking nut (item 234, WP 0718 00) Lockwasher (item 10, WP 0718 00) Flat washers (24) (item 409, 0718 00) Marker tags (item 49, 0716 00C) Wiping rags (item 7, WP 0716 00C) Lockwasher (item 202, WP 0718 00) Equipment Conditions Engine top housing assembly removed (WP 0232 00) Engine oil hose assemblies, tube assemblies and related parts removed (WP 0200 00) NOTE Remove only those parts which must be replaced. Tag all parts prior to removal to aid in installation. Place rags under hose connections to catch any fuel that spills during maintenance. Dispose of rags in accordance with standard operating procedure. Removal 1.   Remove clamps and attaching hardware securing hose assemblies, tube assemblies and fittings as shown in leg- end and illustration. Discard self--locking nut, lockwashers and copper flat washers. 2.   Remove hose assemblies, tube assemblies and fittings in accordance with the following legend and illustration. 3.   Inspect parts for damage and replace as required. LEGEND: 1. Screws (12) 11. Hose assembly 21. Nut 2. Flat washers (24) 12. Connectors (2) 22. Bolt 3. Hose assemblies (10) 13. Swivel tee 23. Nut 4. Connectors (8) 14. Screw 24. Adapter 5. Hose assembly (8) 15. Lockwashers (2) 25. Loop clamp 6. Tee (2) 16. Loop clamps (3) 26. Locknut 7. Hose assembly 17. Bracket 27. Lockwasher 8. Cross tube 18. Lockwasher 28. Tube nipple 9. Hose assembly 19. Screw 29. Access cover (WP 0233 00) 10. Clamp 20. Self--locking nut 30. Hose assembly