TM 9--2350--292--20--1
0204 00--1
FUEL INJECTOR TUBE BRACKETS REPLACEMENT
0204 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Materials/Parts
Self--locking nuts (54) (item 234, WP 0718 00)
Self--locking screws (2) (item 247, WP 0718 00)
Marker tags (item 49, WP 0716 00)
Wiping rags (item 7, WP 0716 00)
Equipment Conditions
Engine top housing assembly removed (WP 0232 00)
NOTE
Remove only those parts which must be replaced.
Tag all parts prior to removal to aid in installation.
Place rags under hose connections to catch any fuel that
spills during maintenance. Dispose of rags in accordance
with standard operating procedure.
Removal
1. Remove attaching hardware securing straps, brackets and spacers as shown in legend and illustration. Discard
self--locking nuts and self--locking screws.
2. Remove straps, brackets and spacers in accordance with the following legend and illustration.
3. Inspect parts for damage and replace as required.
Installation
1. Install straps, brackets and spacers in accordance with the following legend and illustration.
2. Secure straps, brackets and spacers with attaching hardware and new self--locking nuts and new self--locking
screws as shown in legend and illustration.
NOTE
FOLLOW--ON MAINTENANCE:
Install engine top housing assembly (WP 0232 00)