TM 9--2350--292--20--1
MANIFOLD HEATER FUEL FILTER AND SOLENOID REPLACEMENT --
CONTINUED
0223 00
Installation
1. Apply pressure sensitive tape to all threaded pipe and hose fittings.
2. Install tee (2) on fuel filter (6).
3. Install fitting (17) on fuel filter (6).
4. Install solenoid valve (11) on fitting (17).
5. Install elbow (20) on solenoid valve (11) and tee (9) on elbow (20).
6. Install bracket (15), two flat washers (14), two new lockwashers (13) and two screws (12) on bracket (16).
7. Install solenoid valve (11) on bracket (15) with two screws (18) and two flat washers (19).
8. Install electrical connector (10) on solenoid valve (11).
9. Install tube (8) and tube (7) on tee (9).
10. Install fuel filter (6), two flat washers (5), two new lockwashers (4) and two screws (3) on bracket (16).
11. Connect two fuel lines (1) to tee (2).
Figure 31
2
16
3
4
5
18
19
12
13
14
7
9
8
17
11
20
10
15
6
1
1
NOTE
FOLLOW--ON MAINTENANCE:
Install powerpack, if removed (WP 0188 00)
Install front engine deck grilles, if removed
(TM 9--2350--292--10)
END OF TASK
0223 00--3/4 blank
