TM 9--2350--292--20--1
0223 00--2
MANIFOLD HEATER FUEL FILTER AND SOLENOID REPLACEMENT --
CONTINUED
0223 00
Removal--Continued
2. Remove two screws (3), two lockwashers (4) and two flat washers (5) from fuel filter (6). Discard lockwashers.
3. Remove tube (7) and tube (8) from tee (9).
4. Remove electrical connector (10) from solenoid valve (11).
5. Remove two screws (12), two lockwashers (13), two flat washers (14) and bracket (15) from bracket (16). Discard
lockwashers.
6. Remove solenoid valve (11) from fitting (17).
7. Remove fitting (17) from fuel filter (6).
8. Remove tee (2) from fuel filter (6).
9. Remove two screws (18), two flat washers (19) and solenoid valve (11) from bracket (15).
10. Remove tee (9) and elbow (20) from solenoid valve (11), separate tee (9) from elbow (20).
WARNING
11. Clean all metal parts with dry--cleaning solvent. Remove sludge and gum with scraper or stiff brush.
12. Inspect all parts for cracks or damage. Replace any defective parts.
Figure 31
2
16
3
4
5
18
19
12
13
14
7
9
8
17
11
20
10
15
6