TM 9--2350--292--20--1
PRIMARY FUEL FILTER REPAIR -- CONTINUED
0222 00
Installation
1. Slide filter body (1) in bracket (8), install two screws (6) and two new self--locking nuts (7).
2. Connect fuel filter inlet hose (4) and outlet hose (5) to filter body (1).
3. Install nonmetallic hose assembly (2) to bottom of filter body (1).
4. If installing new filter body, remove plug from new filter head (10) and install bleeder valve (3) previously removed
from old filter. Install plug in old filter body head (10).
5. Bleed air from filter and lines by running electric fuel pump until fuel flows from bleeder valve (3). Tighten bleeder
valve screw.
6. Check for leaks at all connections, turn off fuel pump.
Figure 29
1
2
3
4
5
7
8
10
6
6
NOTE
FOLLOW--ON MAINTENANCE:
Install front engine deck grilles
(TM 9--2350--292--10)
END OF TASK
0222 00--5/6 blank