TM 9--2350--292--20--10222 00--4PRIMARY FUEL FILTER REPAIR -- CONTINUED0222 00Cleaning/InspectingWARNING1. Clean all metal filter parts, elbow (19), connector (20), fluid filter (21), inside filter body (1) and head (10) with dry--cleaning solvent. Remove sludge and gum with scraper or stiff brush.2. Inspect all parts for cracks or damage. Replace any defective parts.3. Check fluid filter (21) and attachment point in filter body (1) to be sure that there is no blockage.Assembly1. Install helical spring (15), element retainer (14), new preformed packing (13) and new filter element (12) insidefilter body (1).NOTEDo not tighten locknut on filter head screw. It should bejust snug enough to hold screw yet still allow screw toturn to secure filter head.Use pressure sensitive tape on all threaded fittings ex-cept filter head screw.2. Install bleeder valve (3), new gasket (18), flat washer (17), screw (9) and locknut (16) to filter head (10).3. Install new gasket (11) and filter head (10) to filter body (1).4. Torque screw (9) to 85--95 lb--in. (9.7--10.7 N•m).5. Install elbow (19), connector (20) and fluid filter (21) on filter body (1).Figure 30910111213151617183192021114
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
