Sequential Drain Test- (cont) - TM-9-2350-292-20-1

Sequential Drain Test- (cont) - TM-9-2350-292-20-1_1141

Sequential Drain Test- (cont) - TM-9-2350-292-20-1_1143

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
1095

TM 9--2350--292--20--1 0221 00--12 FUEL/WATER SEPARATOR OPERATION TESTS -- CONTINUED 0221 00 Sequential Drain Test--Continued 11. Disconnect black wire (--) (27) and red wire (+) (26) from positive (+) and negative (--) terminals of 24 V dc power source. 12. Disconnect fuel/water separator test harness connector (24) from left control box receptacle (25) at fuel/water separator control box (22). 13. Disconnect jumper wire (23) from negative (--) side of 24 V dc power source and from suitable metal container. 14. Remove suitable metal container from under solenoid drain valve tube (20). 15. Connect engine electrical harness (21) connector to fuel/water separator control box (22). Figure 29 SUITABLE METAL CONTAINERS 24V dc 21 22 25 23 20 (+) (--) 26 27 24

Privacy Statement
Press Release
Contact