Disassembly - TM-9-2350-292-20-1

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
1099

TM 9--2350--292--20--1 0222 00--3 PRIMARY FUEL FILTER REPAIR -- CONTINUED 0222 00 Disassembly NOTE The following steps provide for a complete disassembly/ assembly of the fuel filter. Perform only those steps nec- essary for maintenance or replacement of defective parts. Do not completely remove screw in center of filter head until later. Screw is secured by a locknut under head. After screw and filter head are loose, turn screw and head together to remove as an assembly. 1. Loosen screw (9), remove filter head (10) and gasket (11). Discard gasket. 2. Remove filter element (12), preformed packing (13), element retainer (14) and helical spring (15) from inside filter body (1). Discard filter element and preformed packing. 3. Remove locknut (16), screw (9), flat washer (17), gasket (18) and bleeder valve (3). Discard gasket. 4. Remove elbow (19), connector (20) and fluid filter (21) from filter body (1). Figure 3 9 10 11 12 13 14 15 16 17 18 3 19 20 21 1

Privacy Statement
Press Release
Contact