TM 9--2350--292--20--1
0225 00--1
RIGHT MANIFOLD HEATER ASSEMBLY AND RELATED PARTS
REPLACEMENT
0225 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Materials/Parts
Self--locking nuts (4) (item 276, WP 0718 00)
Self--locking nuts (4) (item 248, WP 0718 00)
Self--locking nuts (2) (item 234, WP 0718 00)
Electrical tiedown strap (item 382, WP 0718 00)
Marker tags (item 49, WP 0716 00)
Wiping rags (item 7, WP 0716 00)
Materials/Parts--Continued
Gasket (item 275, WP 0718 00)
Lockwashers (2) (item 58, WP 0718 00)
Pressure sensitive tape (item 41, WP 0716 00)
Equipment Conditions
Powerpack removed (WP 0188 00)
WARNING
NOTE
Remove only those parts which must be replaced.
Tag all parts prior to removal to aid in installation.
Place rags under hose connections to catch any fuel that
spills during maintenance. Dispose of rags in accordance
with standard operating procedure.
Removal
1. Remove clamps, electrical tiedown strap and attaching hardware securing hose assemblies, tubes, brackets, so-
lenoid valve, spark plug assembly and nozzle as shown in legend and illustration. Discard self--locking nuts.
2. Remove hose assemblies, tubes, brackets, solenoid valve, spark plug assembly and nozzle in accordance with
the following legend and illustration. Discard gasket.
3. Inspect parts for damage and replace as required.
Installation
1. Set spark plug gap at 0.094 to 0.114 in. (2.35 --2.85 mm).
2. Apply pressure sensitive tape to all male pipe threads.
3. Install hose assemblies, tubes, brackets, solenoid valve, spark plug assembly, nozzle and new gasket in accor-
dance with the following legend and illustration.
4. Secure hose assemblies, tubes, brackets, solenoid valve, spark plug assembly and nozzle as shown in legend
and illustration with clamps and attaching hardware, electrical tiedown strap and new self--locking nuts.