TM 9--2350--292--20--1
0237 00--1
ENGINE GENERATOR REPLACEMENT
0237 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Gasket (item 427, WP 0718 00)
Gasket (item 428, WP 0718 00)
Preformed packing (item 74, WP 0718 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Wiring harness 3W203 disconnected from generator
(WP 0301 00)
Wiring harness 3W202 disconnected from generator
(WP 0300 00)
Equipment Conditions--Continued
Wiring harness 3W201 disconnected from generator
(WP 0299 00)
Wiring harness 3W200 disconnected from generator
(WP 0298 00)
Ground straps disconnected from generator
(WP 0341 00)
Generator oil cooling system lines and fittings
removed (WP 0236 00)
Personnel Required
Two
Removal
1. Remove two nuts (1), clamp (2), engine generator (3) and gasket (4) from engine. Discard gasket.
2. Remove six screws (5), plate (6) and gasket (7) from engine. Discard gasket.
3. Remove hose (8) from elbow (9).
4. Remove elbow (9) and preformed packing (10) from generator (3). Discard preformed packing.
5. Inspect parts for damage and replace as required.
Figure 44
1
3
4
5
6
7
2
10
8
9
