TM 9--2350--292--20--1
0237 00--2
ENGINE GENERATOR REPLACEMENT -- CONTINUED
0237 00
Installation
1. Install new preformed packing (10) and elbow (9) to engine generator (3).
2. Install hose (8) to elbow (9).
3. Install new gasket (7), plate (6) and six screws (5) to engine.
4. Install new gasket (4), engine generator (3), clamp (2) and two nuts (1) to engine.
Figure 44
1
3
4
5
6
7
2
10
8
9
NOTE
FOLLOW--ON MAINTENANCE:
Install engine generator oil cooling system lines and fit-
tings (WP 0236 00)
Connect generator ground straps (WP 0341 00)
Connect wiring harness 3W200 (WP 0298 00)
Connect wiring harness 3W201 (WP 0299 00)
Connect wiring harness 3W202 (WP 0300 00)
Connect wiring harness 3W203 (WP 0301 00)
END OF TASK