TM 9--2350--292--20--1
0242 00--11
MAIN SWITCH PANEL ASSEMBLY REPAIR -- CONTINUED
0242 00
Assembly
1. Install cushion (96) on panel (6) with four new rivets (95).
2. Install preheat toggle switch (54) and key washer (94) on switch panel assembly (6) with lockwasher (93) and nut (92).
3. Install lead (91) on rear of preheat toggle switch (54) between pins 3 and 6.
4. Install switch guard (90) and fuel pump toggle switch (53) on switch panel assembly (6) with two screws (89).
5. Install plug (87) in toggle switch (62) pin 1 and two plugs (88) in toggle switch (59) pins 1 and 4.
NOTE
The horn override and exhaust smoke toggle switches
are installed in the same manner. Perform step 6 to
install one toggle switch.
6. Install toggle switch (59 or 62) on switch panel assembly (6) with key washer (86), switch guard (85), lockwasher
(84) and nut (83).
Figure 50
6
95
96
86
62
87
53
91
54
94
88
59
86
85
84
83
93
92
90
89
83
84
85