TM 9--2350--292--20--1
0254 00--1
STE--ICE RESISTOR BOX AND BRACKET REPLACEMENT
0254 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (12) (item 58, WP 0718 00)
Lockwashers (4) (item 112, WP 0718 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Battery power disconnected (WP 0256 00)
Air purifier control unit enclosure assembly and
bracket removed (WP 0707 00)
For bracket replacement only
References
TM 9--2350--292--10
Removal
1. Disconnect wiring harness 4W800 connector P2 (1) from resistor box (2) receptacle.
2. Remove four screws (3), eight lockwashers (4) and four nuts (5) from resistor box (2). Discard lockwashers.
3. Disconnect cap (6) from wiring harness 4W800 DCA connector J1 (7).
4. Remove four screws (8), four flat washers (9), four lockwashers (10), four nuts (11), cap (6) and wiring harness
4W800 DCA connector J1 (7) from bracket (12). Discard lockwashers.
5. Remove four screws (13), four lockwashers (14) and bracket (12). Discard lockwashers.
6. Inspect parts for damage and replace as required.
Figure 71
1
2
3
4
4
12
5
9
10
11
7
6
8
14
13