TM 9--2350--292--20--1CURRENT SHUNT REPLACEMENT -- CONTINUED0255 00Installation1. Install shunt (19) with four screws (16), four new lockwashers (18) and four flat washers (17).2. Install three lead assemblies 3W209 (3, 4 and 5) with two screws (1) and two new lockwashers (2).3. Install wiring harness 3W801 wires X and Y (9 and 10) with two screws (6), two new lockwashers (8) and two flatwashers (7).4. Install three lead assemblies 3W210--1, --2 and --3 (13, 14 and 15) with two screws (11) and two new lockwashers(12).5. Apply insulating compound to shunt (19) connection points.Figure 7212451319687968710111213111214151618172NOTEFOLLOW--ON MAINTENANCE:Connect battery power (WP 0256 00)END OF TASK0255 00--3/4 blank
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business