TM 9--2350--292--20--1
0256 00--5
POSITIVE BUS BAR REPLACEMENT -- CONTINUED
0256 00
Removal--Continued
13. Remove four screws (44) and positive bus bar (45).
14. Remove two screws (46), two lockwashers (47), two flat washers (48) and insulator (49). Discard lockwashers.
15. Inspect parts for damage and replace as required.
Installation
1. Install insulator (49) with two screws (46), two new lockwashers (47) and two flat washers (48).
2. Install positive bus bar (45) with four screws (44).
Figure 73
45
44
46
47
48
49
