TM 9--2350--292--20--1
0256 00--2
POSITIVE BUS BAR REPLACEMENT -- CONTINUED
0256 00
Removal
WARNING
To prevent personnel injury or equipment damage, steps
1 through 5 are performed to remove battery power from
the vehicle prior to repair of the positive bus bar.
To prevent personnel injury or equipment damage when
disconnecting lead assemblies from batteries, prevent
loose wires, tools or other conductive materials from
touching or shorting across battery terminals.
1. Remove two nuts (1) and two terminal lugs (2) of two lead assemblies 3W210--2 at battery negative (--) terminal
posts (3) and (4).
2. Remove nut (5) and terminal lug (6) of lead assembly 3W210--1 at battery negative (--) terminal post (7).
3. Remove nut (8) and terminal lug (9) of lead assembly 3W212--2 at battery positive (+) terminal post (10).
4. Remove nut (11) and terminal lug (12) of lead assembly 3W212--1 at battery positive (+) terminal post (13).
5. Remove nut (14) and terminal lug (15) of lead assembly 3W212--3 at battery positive (+) terminal post (16).
Figure 102
1
2
3
9
8
10
4
2
1
16
15
14
5
7
6
12
11
13
