TM 9--2350--292--20--1
0258 00--1
ELECTRICAL BULKHEAD CONNECTORS REPLACEMENT
0258 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools
General mechanics tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (12) (item 132, WP 0718 00)
Lockwashers (8) (item 111, WP 0718 00)
Marker tags (item 49, WP 0716 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Battery power disconnected (WP 0256 00)
Engine air cleaner assembly removed (WP 0208 00)
References
TM 9--2350--292--10
NOTE
Tag all electrical connections and electrical leads prior to
removal to aid in installation.
Perform Removal steps 1, 2, 3 and 7 and Installation
steps 4, 5 and 6 for maintenance of bulkhead connectors
J1 thru J5.
Perform Removal steps 4, 5, 6 and 7 and Installation
steps 1, 2 and 3 for maintenance of bulkhead connector
J6.
Additional wiring harnesses may need to be removed to
access faulty electrical bulkhead connector.
Removal
1. Disconnect wiring harness connector (1) from electrical bulkhead connector (2) in engine compartment.
2. Disconnect wiring harness connector (3) from electrical bulkhead connector (2) in crew compartment.
3. Remove four screws (4), four lockwashers (5) and electrical bulkhead connector (2) from electrical bulkhead (6).
Discard lockwashers.
4. Disconnect wiring harness connector (7) from electrical bulkhead connector (8) in engine compartment.
5. Disconnect wiring harness connector (9) from electrical bulkhead connector (8) in crew compartment.
6. Remove four screws (10) and electrical bulkhead connector (8) from electrical bulkhead (6).
7. Inspect parts for damage and replace as required.
Figure 75
4
5
6
8
9
3
2
10
7
1