EXHAUST SMOKE SWITCH AND SWITCH PLATE ASSEMBLY REPAIR

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
1285

TM 9--2350--292--20--1 0259 00--1 EXHAUST SMOKE SWITCH AND SWITCH PLATE ASSEMBLY REPAIR 0259 00 THIS WORK PACKAGE COVERS: Removal, Disassembly, Assembly, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Materials/Parts Lockwashers (4) (item 85, WP 0718 00) Marker tags (item 49, WP 0716 00) Equipment Conditions Vehicle MASTER switch OFF (TM 9--2350--292--10) Battery power disconnected (WP 0256 00) References TM 9--2350--292--10 NOTE Tag all electrical connections and electrical leads prior to removal to aid in installation. Removal 1. Disconnect wiring harness 4W106 (1) from switch plate assembly (2) (WP 0318 00). 2. Remove two screws (3), four lockwashers (4), switch plate assembly (2) and two nuts (5) from mounting bracket (6). Discard lockwashers. Disassembly 1. Remove nut (7), lockwasher (8), switch guard (9), switch assembly (10) and key washer (11) from switch plate (12). Retain attaching hardware to aid in installation. 2. Remove two plugs (13) from switch assembly (10). 3. Inspect parts for damage and replace as required. Figure 69 1 2 3 4 6 5 4 11 9 8 7 10 13 12

Privacy Statement
Press Release
Contact