TM 9--2350--292--20--1
HEADLIGHT DIMMER SWITCH REPLACEMENT (OLD CONFIGURATION)
0260 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (3) (item 85, WP 0718 00)
Marker tags (item 49, WP 0716 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Battery power disconnected (WP 0256 00)
References
TM 9--2350--292--10
NOTE
Tag all electrical connections and electrical leads prior to
removal to aid in installation.
Removal
1. Disconnect wiring harness 4W107 connector P1 (1) from dimmer switch (2).
2. Remove three screws (3), three lockwashers (4) and dimmer switch (2) from subfloor plate #7 (5). Discard lock-
washers.
3. Inspect parts for damage and replace as required.
Installation
1. Install dimmer switch (2) on subfloor plate #7 (5) with three screws (3) and three new lockwashers (4).
2. Connect wiring harness 4W107 connector P1 (1) to dimmer switch (2).
Figure 76
1
2
3
4
5
NOTE
FOLLOW--ON MAINTENANCE:
Connect battery power (WP 0256 00)
END OF TASK
0260 00--1/2 blank