DIRECTIONAL SIGNAL CONTROL SWITCH, DIMMER SWITCH AND BRACKET REPLACEMENT (NEW CONFIGURATION WITH BRAKE MODULATION)

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
1303

TM 9--2350--292--20--1 0268 00--1 DIRECTIONAL SIGNAL CONTROL SWITCH, DIMMER SWITCH AND BRACKET REPLACEMENT (NEW CONFIGURATION WITH BRAKE MODULATION) 0268 00 THIS WORK PACKAGE COVERS: Removal, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Materials/Parts Lockwashers (2) (item 9, WP 0718 00) Equipment Conditions Vehicle MASTER switch OFF (TM 9--2350--292--10) Battery power disconnected (WP 0256 00) Personnel Required Two References TM 9--2350--292--10 Removal 1. Disconnect wiring harness 4W127 connector P2 (1) from connector J2 on directional signal control switch (2). 2. Remove clamp (3) and directional signal control switch (2) from bracket (4). 3. Remove two nuts (5), two lockwashers (6), four flat washers (7), two screws (8), bracket (4) and dimmer switch bracket (9) from vehicle. Discard lockwashers. 4. Inspect parts for damage and replace as required. 1 2 3 4 5 6 7 7 8 9

Privacy Statement
Press Release
Contact