PASSIVE NIGHT VIEWER SWITCH AND INDICATOR ASSEMBLY REPAIR (cont)

PASSIVE NIGHT VIEWER DUMMY CONNECTOR REPLACEMENT (cont)

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
1299

TM 9--2350--292--20--1 0266 00--1 PASSIVE NIGHT VIEWER SWITCH AND INDICATOR ASSEMBLY REPAIR 0266 00 THIS WORK PACKAGE COVERS: Removal, Disassembly, Assembly, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Materials/Parts Lockwashers (2) (item 90, WP 0718 00) Lockwasher (item 93, WP 0718 00) Gasket (item 91, WP 0718 00) Gasket (item 92, WP 0718 00) Marker tags (item 49, WP 0716 00) Equipment Conditions Vehicle MASTER switch OFF (TM 9--2350--292--10) Battery power disconnected (WP 0256 00) Personnel Required Two References TM 9--2350--292--10 NOTE Perform Removal steps 1 and 2 and Disassembly step 2 and Installation steps 4 and 5 to replace passive night viewer switch. Perform Removal steps 3 through 5 and Disassembly step 2 and Installation steps 1 through 3 to replace pas- sive night viewer indicator assembly. Tag all electrical connections and electrical leads prior to removal to aid in installation. Removal 1. Disconnect wiring harness 4W105 wire 999A (1) and wire 999B (2) from switch (3). 2. Remove two screws (4), two lockwashers (5), plate (6) and switch (3). Discard lockwashers. 3. Disconnect wiring harness 4W105 wire 516 (7) from indicator assembly (8). 4. Remove lens (9), gasket (10), gasket (11) and bulb (12). Discard gaskets. 5. Remove two screws (13) and indicator assembly (8). Figure 80 13 9 10 11 12 1 2 3 6 5 4 8 7

Privacy Statement
Press Release
Contact