TM 9--2350--292--20--1
0264 00--1
BILGE PUMP POWER LOAD RELAY, CIRCUIT BREAKER AND MOUNTING
PLATE REPLACEMENT
0264 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (4) (item 58, WP 0718 00)
Lockwashers (2) (item 132, WP 0718 00)
Marker tags (item 49, WP 0716 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Battery power disconnected (WP 0256 00)
References
TM 9--2350--292--10
NOTE
Perform Removal steps 1, 2 and 6 and Installation steps
4 and 5 for maintenance of bilge pump power load relay.
Perform Removal steps 3, 4 and 6 and Installation steps
2 and 3 for maintenance of circuit breaker.
Tag all electrical connections and electrical leads prior to
removal to aid in the installation.
Removal
1. Disconnect wiring harness 4W136 connector P2 (1) from bilge pump relay (2).
2. Remove two bolts (3), two lockwashers (4) and bilge pump relay (2). Discard lockwashers.
Figure 78
1
2
4
3
