TM 9--2350--292--20--1
BRAKE RELAY, CIRCUIT BREAKER AND BRAKE RELAY COVER
REPLACEMENT -- CONTINUED
0263 00
Installation
1. Install circuit breaker (26) with two screws (27), two new lockwashers (28) and two flat washers (29).
2. Install wiring harness 4W155 wire 48 (23), wiring harness 4W305 terminal lug T1/T2 (24) and wiring harness
4W100 wire 48 (25) to circuit breaker (26) with two screws (21) and four lockwashers (22).
3. Install brake relay (10) and wiring harness 4W155 wire 578 (19) with two screws (17), three new lockwashers (18)
and flat washer (20).
4. Install wiring harness 4W110 wire 589 (15) on terminal 88 (16) and two wiring harness 4W155 wires 48 (13) on
terminal 88A (14) of brake relay (10) with two nuts (11) and two lockwashers (12).
5. Install wiring harness 4W155 wire 590 (8) on terminal 86 (9) and wire 578 (6) on terminal 85 (7) of brake relay
(10) with two screws (5).
6. Install brake relay cover (4) with three screws (1), three new lockwashers (2) and three flat washers (3).
(HIDDEN)
1
2
3
4
22
21
21
22
23
10
7
20
18
17
5
8
9
16
17
18
18
19
5
13
11
12
15
12
11
14
6
22
22
24
25
27
28
29
26
NOTE
FOLLOW--ON MAINTENANCE:
Connect battery power (WP 0256 00)
END OF TASK
0263 00--3/4 blank