TM 9--2350--292--20--1
0266 00--2
PASSIVE NIGHT VIEWER SWITCH AND INDICATOR ASSEMBLY REPAIR --
CONTINUED
0266 00
Disassembly
1. Remove nut (14), lockwasher (15) and bracket (16) from lamp body (17). Discard lockwasher.
2. Inspect parts for damage and replace as required.
Assembly
Install nut (14), new lockwasher (15) and bracket (16) to lamp body (17).
Installation
1. Install indicator assembly (8) with two screws (13).
2. Install bulb (12), new gasket (11), new gasket (10) and lens (9) on indicator assembly (8).
3. Connect wiring harness 4W105 wire 516 (7) to indicator assembly (8).
4. Install plate (6) and switch (3) with two screws (4) and two new lockwashers (5).
5. Connect wiring harness 4W105 wire 999B (2) and wire 999A (1) to switch (3).
Figure 80
4
5
6
3
2
1
14
15
16
17
7
12
11
10
9
13
8
NOTE
FOLLOW--ON MAINTENANCE:
Connect battery power (WP 0256 00)
END OF TASK
