TM 9--2350--292--20--1
0325 00--1
WIRING HARNESS 4W136 REPLACEMENT
0325 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit
(item 1, WP 0717 00)
Materials/Parts
Lockwashers (7) (item 58, WP 0718 00)
Grommet (item 331, WP 0718 00)
Marker tags (item 49, WP 0716 00)
Equipment Conditions
Vehicle MASTER switch OFF
(TM 9--2350--292--10)
Battery power disconnected (WP 0256 00)
Subfloor plates #13, #16 and #17 opened or
removed (WP 0454 00)
Stowage baskets removed from beneath
subfloor plate #18 (WP 0465 00)
References
TM 9--2350--292--10
Removal
NOTE
Tag all electrical connections and electrical leads prior to
removal to aid in installation.
The following legend identifies attachment points for each
connection.
Retain attaching hardware securing terminal T1 to bilge
pump circuit breaker.
1. Remove wiring harness (1) and attaching hardware, at the following attachment points:
Item
No.
4W136
Connector/Lead/Wire
From
Connector/Lead/Wire
Component
Location
2
Connector P1
Bilge Pump (If Deep Water
Fording Kit Is Installed)
Beneath Subfloor
3
Connector P2
Bilge Pump Relay
Beneath Subfloor
4
Terminal T1
Bilge Pump Circuit Breaker
Beneath Subfloor
5
Wire 450B
Wiring Harness 4W153 Wire
450B
Crew Compartment
(Behind Switch Panel)
