TM 9--2350--292--20--1
0325 00--3
WIRING HARNESS 4W136 REPLACEMENT -- CONTINUED
0325 00
Removal--Continued
2. Remove straps, clamps, attaching hardware and lockwashers (A and B), securing wiring harness (1) to vehicle, as
shown in illustration. Discard lockwashers.
3. Remove wiring harness (1).
4. Remove and discard grommet (C).
5. Inspect parts for damage and replace as required.
Installation
NOTE
Replacement grommet may need to be split before instal-
lation.
1. Install new grommet (C) in subfloor plate.
2. Install wiring harness (1) in vehicle, with straps, clamps, attaching hardware and new lockwashers
(A and B), as shown in illustration.
Figure 151
A
B
B
B
A
C
C
1