TM 9--2350--292--20--10341 00--1GENERATOR GROUND STRAP REPLACEMENT0341 00THIS WORK PACKAGE COVERS:Removal, InstallationINITIAL SETUP:Tools and Special ToolsGeneral mechanic’s tool kit (item 1, WP 0717 00)Materials/PartsSelf--locking nut (item 251, WP 0718 00)Lockwashers (3) (item 11, WP 0718 00)Silicone adhesive (item 81, WP 0716 00)Marker tags (item 49, WP 0716 00)Equipment ConditionsVehicle MASTER switch OFF (TM 9--2350--292--10)Powerpack removed (WP 0188 00)ReferencesTM 9--2350--292--10NOTETag all electrical connections and electrical leads prior toremoval to aid in installation.Remove wiring harnesses as necessary to perform thistask.Removal1. Remove screw (1), flat washer (2) and two ground straps (3) from generator cradle bracket (4).2. Remove silicone adhesive from negative (ground) bus bar terminal (5), if previously applied.3. Remove nut (6), three lockwashers (7), screw (8), two ground straps (3) and wiring harness 3W201 (9). Discardnut and lockwashers.4. Inspect parts for damage and replace as required.InstallationWARNING1. Install wiring harness 3W201 (9) and two ground straps (3) on generator negative bus bar (5) with screw (8), threenew lockwashers (7) and new nut (6). Apply silicone adhesive to exposed terminals.2. Install two ground straps (3) on generator cradle bracket (4) with screw (1) and flat washer (2).NOTEFOLLOW--ON MAINTENANCE:Install powerpack (WP 0188 00)
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business