TM 9--2350--292--20--1
0342 00--1
STARTER GROUND STRAP REPLACEMENT
0342 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Materials/Parts
Silicone adhesive (item 81, WP 0716 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Powerpack removed (WP 0188 00)
References
TM 9--2350--292--10
NOTE
Tag all electrical connections and electrical leads prior to
removal to aid in installation.
Remove wiring harnesses as necessary to perform this
task.
Removal
1. Remove nut (1), lockwasher (2), cable (3), two ground straps (4) and cable (5) from starter motor ground terminal
stud (6). Retain attaching hardware to aid in installation.
2. Remove silicone adhesive from starter motor ground terminal stud (6), if previously applied.
3. Remove screw (7), flat washer (8) and two ground straps (4) from angle bracket (9).
4. Inspect parts for damage and replace as required.
Installation
1. Install two ground straps (4) on angle bracket (9) with flat washer (8) and screw (7).
2. Install cable (5), two ground straps (4) and cable (3) on starter motor ground terminal stud (6) with lockwasher (2)
and nut (1).
WARNING
3. Apply silicone adhesive to starter motor ground terminal stud (6).
NOTE
FOLLOW--ON MAINTENANCE:
Install powerpack (WP 0188 00)