BLACKOUT MARKER LIGHT FAILS TO OPERATE. (cont)

BLACKOUT STOPLIGHTS FAIL TO OPERATE (cont) - TM-9-2350-292-20-1_590

BLACKOUT MARKER LIGHT FAILS TO OPERATE. (cont) - TM-9-2350-292-20-1_592

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
547

TM 9--2350--292--20--1 0120 00--1 BLACKOUT MARKER LIGHT FAILS TO OPERATE. 0120 00 THIS WORK PACKAGE COVERS: Blackout Stoplights Fail To Operate INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Multimeter (item 84, WP 0717 00) Equipment Conditions Vehicle MASTER switch OFF (TM 9--2350--292--10) Personnel Required Two 1. Turn MASTER switch ON (TM 9--2350--292--10). 2. Set main light switch to BO MARKER (TM 9--2350--292--10). 3. Observe blackout marker lights. 4. Turn MASTER switch OFF (TM 9--2350--292--10). no yes If one or both blackout markers on headlamps fail to light, go to Step F. If one or both tail lamps fail to light, go to Step J. no yes Repair (WP 0290 00) or replace (WP 0314 00) harness 4W100. Verify fault is corrected. A B 1. Remove switch panel from bracket (WP 0242 00) and reconnect ground strap to switch panel. 2. Disconnect harness 4W105 P1 from switch panel. 3. Turn MASTER switch ON (TM 9--2350--292--10). 4. Place multimeter red lead in harness 4W105 P1 socket N and black led to ground. Check for voltage. 5. Turn MASTER switch OFF (TM 9--2350--292--10). Is 24 V dc present? Do any blackout marker lights light? CONTINUED ON NEXT PAGE WARNING Remove rings, bracelets, wristwatches, and neck chains before working on any vehicle. Jewelry can catch on equip- ment and cause injury, or may short across an electrical circuit and cause severe burns or electrical shock.

Privacy Statement
Press Release
Contact