TM 9--2350--292--20--1
0119 00--2
BLACKOUT STOPLIGHTS FAIL TO OPERATE -- CONTINUED
0119 00
Is 24 V dc present?
1. Disconnect harness 3W142 P1 from bulkhead
disconnect.
2. Turn MASTER switch ON
(TM 9--2350--292--10).
3. Set main light switch to BO DRIVE or BO
MARKER (TM 9--2350--292--10).
4. While assistant presses brake pedal, place
multimeter red lead in harness 3W142 P1
socket C and black lead to ground. Check for
voltage.
5. Turn MASTER switch OFF
(TM 9--2350--292--10).
no
yes
Go to Step L.
C
CONTINUED ON NEXT PAGE
CONTINUED FROM STEP B
