TM 9--2350--292--20--1
0118 00--4
TURN SIGNAL FAILS TO OPERATE -- CONTINUED
0118 00
CONTINUED ON NEXT PAGE
1. Turn MASTER switch OFF
(TM 9--2350--292--10).
2. Disconnect harness 4W127 P1 from directional
signal control.
3. Turn MASTER switch ON
(TM 9--2350--292--10).
4. Place multimeter red lead in harness 4W127 P1
socket G and black lead to ground. Check for
voltage.
5. Turn MASTER switch OFF
(TM 9--2350--292--10).
Is 24 V dc present?
H
no
yes
Go to Step M.
1. Reconnect harness 4W127 P1 to directional
signal control.
2. Disconnect harness 4W127 P3 from flasher.
3. Turn MASTER switch ON
(TM 9--2350--292--10).
4. Place multimeter red lead in harness 4W127 P3
socket B and black lead to ground. Check for
voltage.
5. Turn MASTER switch OFF
(TM 9--2350--292--10).
Is 24 V dc present?
I
CONTINUED FROM STEP G
no
yes
Go to Step L.
